|  Features
- Compact,
benchtop mounted machine (less than 4 sq. ft.)
- Cycle rates
up to 45 times per minute (over 2,700 per hour)
- Digital and
resetable counter
- Right-hand
or left-hand configuration
- Simple tooling
head change
(less than 10 minutes)
- Can be automated
for horizontal or vertical applications
- Accommodates
O-rings ranging from 0.890" (22.606mm) to 2.0" (50.8mm)
outside diameter
Applications
- O-Rings
- Quad Rings
- Back-up Rings
- Split Seals
- Cup Rings
- Teflon®
Seals
Machine
Specifications
- 115 Vac,
60 Hz. (other voltages available upon request)
- 90 psi (6.205
bar) air supply
ASP-2
Options
- Low
Lube Reservoir Sensor - Shuts down the ASP-1 when the
lubricant reservoir needs refilling. Click here
for the spec sheet.
- O-Ring
Detection - A sensor checks for the presence of an O-ring
on the mandrel with each cycle of the machine. If an O-ring is
not present, a warning light will be turned on and the machine
will shut down. Click here
for the spec sheet.
- O.D.
Lubricator - Applies lubrication to the outside diameter
of the O-ring. Click here for
the spec sheet.
- Stainless
Steel - Available for "clean room" applications.
- I-Beaming and Extreme Clearance - Handles some degree of additional warping. Click here for the spec sheet.
Standard
ASP-2 Dimensions
- Click here
for layout drawing.
- Click here
for the spec sheet.
ASP-2 Spec Sheet
Low Lube Sensor Spec Sheet
O.D. Lube Spec Sheet
O-Ring Detection Spec Sheet
|
